Free shipping over $30 90-day returns Lifetime satisfaction guarantee

Why is my printer printing streaks or faded pages?

Streaks, lines and faded prints on a laser printer usually come from the drum, the corona wire, a toner-saving setting, or a cartridge near the end of its life. Clean the corona wire if your printer has one, check the remaining drum life, turn off toner save, and replace the toner cartridge only after those checks.

Name the defect first

The fix depends on what the page looks like. Print a page with text and a solid filled area, then compare it to these patterns.

  • Dark vertical lines: lines that run down the length of the page, in filled areas or blank areas. HP’s user guide lists these separately from light streaks (HP LaserJet Pro M404 user guide).
  • Light vertical streaks: HP describes these as streaks that “display only in areas of fill, not in text or sections with no printed content.”
  • Repeating marks: dots or marks at a fixed spacing down the page. On Brother printers, marks at 3.7 in. (94 mm) intervals point to the drum (Brother support).
  • Faded or light pages: the whole page prints too light.

Brother printers: corona wire and drum first

Most Brother mono lasers use a separate toner cartridge and drum unit. For black lines down the page, Brother lists four causes in this order: a dirty corona wire, a damaged drum unit, a damaged toner cartridge, and a contaminated fuser unit (Brother support). Start with the corona wire. It costs nothing.

  1. Open the front cover and remove the toner cartridge and drum unit assembly.
  2. Slide the green tab on the drum unit gently from left to right and right to left several times.
  3. Return the tab to the home position. Brother says the arrow on the tab must line up with the arrow on the drum unit. “If it is not, printed pages may have a vertical stripe.”
  4. Reinstall the assembly and close the front cover.

Those steps come from Brother’s HL-L2350DW corona wire page. Some models show a Drum ! message. Brother says that message means the corona wire on the drum unit needs to be cleaned. If it continues after cleaning and reinstalling, Brother says the drum unit is at the end of its life (Brother support).

For repeating marks, Brother has a Drum Dot Print procedure. You print a check sheet, find the spot on the drum, and wipe it gently with a dry cotton swab. Brother warns not to touch the drum surface and not to use sharp objects or liquids on it.

Check the drum life before you buy anything. On many Brother models you can see the approximate remaining drum life under Menu > Machine Info. > Parts Life. Touchscreen models use Settings > All Settings > Machine Info. > Parts Life (Brother online user guide). If the printer shows Drum End Soon, Brother says you can keep printing and replace the drum when print quality is no longer acceptable or Replace Drum appears (Brother support). Our Brother drum unit guide has more detail.

HP printers: the drum is inside the cartridge

On HP LaserJet printers like the M404, the toner cartridge carries its own imaging drum and memory chip. So on those models, a scratched drum means a new cartridge. HP’s M404 user guide gives these steps:

  1. Print a cleaning page. HP says paper, toner and dust can build up inside the printer and cause “streaks, lines, or repeating marks.” On the M404 and M405, the path is Setup > Printer Maintenance > Print Quality Tools > Cleaning Page.
  2. Inspect the cartridge. Remove it, check that the sealing tape is off, and look at the green imaging drum. Do not touch it. If you see scratches, fingerprints or other damage on the drum, HP says to replace the cartridge.
  3. For dark vertical lines: reprint, shake the cartridge to redistribute toner, print a cleaning page, and check the toner level.
  4. For light streaks in filled areas: reprint and shake the cartridge. HP notes that both light and dark vertical streaks can happen when the room is outside the printer’s temperature or humidity range.

Source: HP LaserJet Pro M404 user guide.

Faded or light pages

A light page is often a setting, not a part. Brother says that if the whole page is too light, Toner Save Mode may be on (Brother support). HP gives the same advice for EconoMode on mono models and says to turn it off at both the printer and the print driver.

  • Turn off toner save (Brother) or EconoMode (HP).
  • Shake the cartridge gently to spread the remaining toner.
  • Check the room. Brother says humidity and high temperatures can cause faint print.
  • On Brother, clean the drum and the corona wire, then replace the drum if that does not help.
  • On HP, print a supplies status page to check cartridge life, and make sure the cartridge is installed correctly.

Inkjet streaks

Inkjet printers have no drum, so the checks are different. Canon says to print a nozzle check pattern and clean the print head if lines are missing or horizontal white streaks appear. Canon also notes that cleaning uses ink, so clean only when necessary. If two cleanings do not fix it, Canon says to run a deep cleaning (Canon PIXMA manual).

The honest part

The most common advice online is to replace the toner cartridge. Sometimes that is right. But on Brother printers, the toner and the drum are separate parts, and Brother’s own list for black lines puts the corona wire and the drum ahead of the toner. A new toner cartridge will not fix a worn or scratched drum. That is true for genuine and compatible toner alike.

You will also see tips to wipe the drum with rubbing alcohol. Brother says not to use liquids or sharp objects on the drum, and its procedure uses a dry cotton swab only. HP says not to touch the imaging drum at all, because fingerprints can cause print-quality problems.

Some streaks are not a supply problem. Brother lists a contaminated fuser as a cause of black lines and says to contact Brother for that. HP points to temperature and humidity. If you have worked through these steps and believe one of our cartridges or drums is the cause, see our guarantee and returns page.

Common questions

Why does my laser printer print black lines down the page?

Brother lists a dirty corona wire, a damaged drum unit, a damaged toner cartridge, or a contaminated fuser. Clean the corona wire first, because it costs nothing and is first on Brother's list.

Will a new toner cartridge fix streaks?

Only if the toner cartridge is the cause. On Brother printers the drum is a separate part, so a new toner cartridge will not fix a worn or scratched drum. On HP LaserJets like the M404, the drum is built into the cartridge.

What causes marks that repeat down the page?

On Brother printers, dots or marks at 3.7 in. (94 mm) intervals point to something stuck on the drum. Brother's Drum Dot Print procedure shows you how to find the spot and wipe it with a dry cotton swab.

Why is my whole page printing light?

Check for Toner Save Mode (Brother) or EconoMode (HP) first. Then shake the cartridge, check the room's temperature and humidity, and check the remaining cartridge and drum life.

Can I clean the drum with rubbing alcohol?

Brother says not to use liquids or sharp objects on the drum. Its procedure uses a dry cotton swab only, and HP says not to touch the imaging drum at all.

Sources

We link every page we took a fact from. Our editorial standards explain how this content is researched and updated.