
87A
Compatible HP 87A Black Toner Cartridge (CF287A)
9,000 pages

Photos show the compatible cartridge. Images marked OEM show the genuine HP product for reference.
Replaces HP 87X (CF287X) · SKU TS-HP87X
18,000 pages, about 0.2¢ per page
Buying for the office? The price drops with quantity.
Applied automatically in the cart. The break is per cartridge.
Orders of $300 or more get $10 off at checkout.
We email a one-click reorder link when it's time. You only pay when you reorder.
This compatible 87X prints about 18,000 pages at roughly 0.2¢ a page and replaces the genuine HP 87X. It fits the HP LaserJet Enterprise Flow M506dh, HP LaserJet Enterprise Flow M506dn and HP LaserJet Enterprise Flow M506n and 20 other HP models.
Fits 23 printer models. Pick yours to see everything else it takes.
or pick your printer
| Replaces OEM number | HP 87X |
|---|---|
| Also written as | CF287X |
| Color | Black |
| Rated yield | 18,000 pages (Approx. yield per ISO/IEC 19752 / 19798 at 5% coverage (letter/A4)) |
| Yield class | High yield |
| Cost per page | 0.2¢ at our price |
| Chip | Not published by HP |
| Build | Confirmed with the supplier before launch |
| Facts checked | 2026-09-22 by Dan Whitaker, Print Technician |
Specs from acmtech.com.
| Genuine HP 87X | TonerInkWorld 87X | |
|---|---|---|
| Price | $143.00 | $35.09 |
| Rated yield | 18,000 pages | 18,000 pages |
| Cost per page | 0.8¢ | 0.2¢ |
| Printer warranty | Unaffected | Unaffected under the Magnuson-Moss Warranty Act |
| Returns | Varies by seller | 90 days, opened defective cartridges included |
Genuine price from SupplyLink USA genuine listing, checked Sep 22, 2026. Source. Prices move, so we re-check monthly.
Power the printer down, reseat the cartridge, check the chip for damage, and confirm the cartridge matches your exact model. If the message stays, check whether a firmware update changed how the printer reads third-party chips.
Full guideNine times out of ten the sealing tape is still in place or the cartridge needs rocking to spread the toner. Pull the cartridge, check the tape, rock it gently, and reinstall.
Full guideStreaks usually come from the drum, not the toner. Clean the corona wire if your printer has one, and check the drum count before replacing the cartridge again.
Full guideAbout 18,000 pages. The rating follows Approx. yield per ISO/IEC 19752 / 19798 at 5% coverage (letter/A4). That is a rated average, so heavy graphics use toner faster than plain text.
Both fit the same printers. The 87X is the high-yield cartridge and the 87A is the standard-yield one, so the difference is how often you swap it, not whether it works.
No. Under the Magnuson-Moss Warranty Act a manufacturer cannot void your warranty just because you used a third-party cartridge. If a cartridge of ours damages your printer, our printer damage protection covers the repair.
Send it back. Returns are open for 90 days and that includes opened cartridges that are defective. Shipping is free both ways.
Only logged in customers who have purchased this product may leave a review.

87A
9,000 pages
No issues
We mainly print payroll packets, and output has been consistent. Good fit for what we print.
Happy with it
This went into the printer at the practice office. Output has been consistent and the printer recognized it right away. It did the job.
Good fit
Most of our printing is reports. Installation was straightforward and print has stayed dark and even. That is all I need from it.
Good fit
The printer gets used throughout the week at the supply room desk. We mainly print house rules, and pages are coming out clean. I would order it again.
Happy with it
I bought it for HVAC company use. We have not had any cartridge errors. It did the job. Glad we tried it.
Good fit
Most of our printing is job sheets. Print has stayed dark and even and we have not seen streaking. Happy with the results.
Would reorder
I bought it for hotel use. Print has stayed dark and even. It did the job.
Easy replacement
We mainly print attendance reports, and pages are coming out clean. I would buy another.
Good fit
I handle the supply ordering for the service desk. This went into the printer at the service desk. Installation was straightforward and print has stayed dark and even. I would order it again.