
Photos show the compatible cartridge. Images marked OEM show the genuine HP product for reference.
Compatible HP 30A MICR Black Toner Cartridge (1,600 pages)
Replaces HP 30A MICR (CF230A) · SKU TS-HP30A-MICR
1,600 pages, about 3.9¢ per page
Buying for the office? The price drops with quantity.
- 2 or more$54.58 eachsave 12%
- 4 or more$51.93 eachsave 16%
Applied automatically in the cart. The break is per cartridge.
Orders of $300 or more get $10 off at checkout.
We email a one-click reorder link with your 5% subscriber price when it's time. You only pay when you reorder.
- Free shipping over $30
- Lifetime satisfaction guarantee
- 90-day returns, including opened cartridges that are defective
- Printer damage protection on every cartridge we sell
This compatible 30A MICR prints about 1,600 pages at roughly 3.9¢ a page and replaces the genuine HP 30A MICR. It fits the HP LaserJet PRO M203d, HP LaserJet PRO M203dn and HP LaserJet PRO M203dw and 4 other HP models.
Will this fit my printer?
Fits 7 printer models. Pick yours to see everything else it takes.
- HP LaserJet PRO M203dUses 32A, 30A, 30X +4
- HP LaserJet PRO M203dnUses 32A, 30A Jumbo, 30A MICR +4
- HP LaserJet PRO M203dwUses 32A, 30A Jumbo, 30A MICR +4
- HP LaserJet PRO MFP M227fdwUses 32A, 30A MICR, 30X MICR +4
- HP MFP 227sdnUses 32A, 30A, 30X +4
- HP MFP 277dUses 32A, 30A, 30X +2
- HP MFP 277fdnUses 32A, 30A, 30X +2
Find your cartridge
or pick your printer
Specifications
| Replaces OEM number | HP 30A MICR |
|---|---|
| Color | Black |
| Rated yield | 1,600 pages (Approx. yield per ISO/IEC 19752 / 19798 at 5% coverage (letter/A4)) |
| Yield class | Standard yield |
| Cost per page | 3.9¢ at our price |
| Chip | Not published by HP |
| Build | Confirmed with the supplier before launch |
| Facts checked | 2026-09-23 by Dan Whitaker, Print Technician |
Specs from acmtech.com.
How to install it
- Open the cartridge door on the front of the printer.
- Pull the old cartridge straight out.
- Take the new cartridge out of its bag and rock it gently five or six times end to end.
- Pull the sealing tab straight out to remove the tape.
- Line the cartridge up with the guides inside the printer and push it in until it seats.
- Close the door and print a test page.
If something goes wrong
The printer does not recognize the cartridge
Power the printer down, reseat the cartridge, check the chip for damage, and confirm the cartridge matches your exact model. If the message stays, check whether a firmware update changed how the printer reads third-party chips.
Full guidePages come out blank or very light
Nine times out of ten the sealing tape is still in place or the cartridge needs rocking to spread the toner. Pull the cartridge, check the tape, rock it gently, and reinstall.
Full guideStreaks or a repeating mark down the page
Streaks usually come from the drum, not the toner. Clean the corona wire if your printer has one, and check the drum count before replacing the cartridge again.
Full guideQuestions about the 30A MICR
How many pages does a 30A MICR print?
About 1,600 pages. The rating follows Approx. yield per ISO/IEC 19752 / 19798 at 5% coverage (letter/A4). That is a rated average, so heavy graphics use toner faster than plain text.
What if it does not work in my printer?
Send it back. Returns are open for 90 days and that includes opened cartridges that are defective. Shipping is free both ways.
4 reviews for Compatible HP 30A MICR Black Toner Cartridge (CF230A)
Only logged in customers who have purchased this product may leave a review.
Solid replacement
The printer gets used throughout the week at the supply room desk. We mainly print check-in sheets, and output has been consistent. It did the job.
Would reorder
For us, consistency matters more than anything fancy. This went into the printer at the practice office. The printer recognized it right away and print has stayed dark and even. No complaints so far.
No issues
I handle the supply ordering for the project office. This went into the printer at the project office. Installation was straightforward and small text is sharp. I would order it again.
Does the job
I handle the supply ordering for the shop office. Most of our printing is inspection sheets. Print has stayed dark and even and output has been consistent. I would order it again.